Latest aluminium pipe sale Tenders | Government aluminium pipe sale Tenders

CTN :45724340

06 Jul, 2026 7.75 Lacs

Multi City - Telangana

Tender For procurement of leakage materials arresting of leakages and in division no.44, 45, 46,47,62,63 and 64 under annual maintenance for the year 2026-27 - 150 mm dia , 150 mm dia 15 mm thick , 160 mm dia , 200 mm dia , 200 mm dia 15 mm thick , 200 mm dia hdpe , 315 mm dia hdpe , 350 mm dia m.s , arresting of leakages at various locations in ward no. 44,45,46,47 &48 including earthwork excavation and arresting of leakages with required materials and red rock cement, portland cement, caulking, necessary apparatus leakage arresting and refilling of the excavated earth includind cost and conveyance of all tools materials and labour charges etc., complete. (a) 160 mm dia hdpe , cost of m.s flanges including cost of bolts, nuts, rubber packing etc., complete and flange thickness conforming to is:7322-1985 and flange dimensions conforming to is:1538-1993 excluding cost of ms specials including cost and conveyance to site etc., complete. (a) 100 mm dia 15 mm thick , manufacture, supply and delivery of di d/f gate valves (soft seated) resilient seated soft sealing gate valves (sluice valves) with body bonnet of ductile cast iron of grade ggg-40/ sg- 400/15 or ggg-50/sg-500/7 or equivalent grade as per i.s.3896-part2-1985 and subsequent revisions, wedge fully rubber lined with epdm food grade quality and seals of nbr and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per bs5163-89/is14846-2000/din 3202 f 4. all the valves should be with electrostatic powder coating both inside and outside pocket less body passage. drilled as per requirement of the dept. (a) 100 mm dia , manufacture, supply, & delivery of hdpe fittings conforming to is 4984 - 1995 including transportation to anywhere in t.g. excluding taxes. pipe end long neck (a) 110 mm dia , manufacture, supply,& delivery of high density polyethylene pipes (pe-100 grade) for water supply conforming to is 4984-2016 including transportation to any where in t.g, but excluding gst and specials etc.,complete(supply upto 90 mm dia in coil & above 90 mm dia straight length in 6 metres.) 8 kg (a) 110 mm dia hdpe , supply and delivery of 53 grade opc cement bags including all charges etc., complete as per the directions of the departmet officer in charge. , supply and delivery of frc cement supply 5 kg bag including all charges etc., as per the directions of the departmet officer in charge complete. , supply and delivery of nuts and bolts including all charges etc., complete.as directed by the deparment officer in charge. , supply and delivery of packing rope including all charges as per the directions of the departmet officer in charge. , supply and delivery of rubber sheet including all charges etc., as per the directions of the departmet officer in charge complete. , supply, fabrication and fixing in position of ms for windows and grills including cost and conveyance of all material and all labour chages for fabricating, fixing including cost of welding rods, power charges, xcluding cost of fixing in positio etc complete.

Central Government/Public Sector

CTN :45492036

06 Jul, 2026 NA

Kota - Rajasthan

Tender For corrigendum : special repair for replacement of ci/ gi water pipe line into di (ductile iron) pipe line in gtc area at mil stn kota

State Government

CTN :45705811

30 Jun, 2026 NA

Karnal - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 4. 100 mm i/d ,providing and fixing cast iron detachable joints class-25 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complet ,providing, lowering, laying in trenches, aligning, fixing in position and jointing ductile iron (di) isi marked k-9 grade sands pipes as per 15:8329-2000 (amended up to date), with internal cement mortar lining for potable water with rubber ring (epdm/sbr) joints as per is: 5382-1985 (excluding special accessories) complete including all material, labour, hydraulic testing and commissioning as per technical specifications and as per direction of engineer. note: e/w to be measured and paid separately. , providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths ductile iron (di) standard specials plain /flanged/ socketed confirming to is9523-2000 with rubber ring (epdm/sbr) joints such as tees, bends, tapers, caps etc. with in trenches in di pipe line complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia,providing, lowering, laying in trenches, aligning, fixing in position and jointing at all level/depths cast iron (ci) standard specials plain /flanged/ socketed confirming to is13382 with rubber ring, nut bolts and rubber sheet such as tees, bends, tapers, caps etc. complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and as per direction of engineer. 1. up to 300mm dia, sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 1.1. 100 mm diameter class ,sluice valves/ fire hydrants and fixtures providing and fixing c.i. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 3.1. 150 mm diameter class i

State Government

CTN :45671133

01 Jul, 2026 NA

Ranchi - Jharkhand

Tender For government of jharkhand through its public works department (pwd) is engaged in framing / revision of schedule of rates and as part of this endeavor, quotations through e-tender are invited for rate of items / materials annexed as annexure-1 .- manufacturing, supply, delivery of double chambered restrained joint di k9 pipes confirming o is 8329 (restrained joints are designed and tested as per iso 10804) (to be used to for minimum required length as per design along with double chambered restained di fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to is 5382- 1985/ 8329- 2000 with latest amendments and locking bars & rubber spacers, conveying to work site, including loading and unloading at both destinations, excluding cost of specials., note:- the rates are f.o.r. at worksite in jharkhand including royalty, inspection charges and other taxes but excluding gst & c.p., 100 mm , 150 mm , 200 mm, 250 mm, 300 mm, 350 mm , 400 mm, 450 mm, 500 mm, 600 mm, 700 mm, 750 mm, 800 mm, 900 mm, 1000 mm, double chambered restrained joint di fittings, manufacture, supplying and fitting ductile iron double chambered restrained joint fittings confirming to is 9523 : 2000 (restrained joints are designed and tested as per iso 10804) of class k-12 (alternative and to avoid concrete thrust block along with minimum length of restrained joint di pipes at bends) including rubber gaskets etc. complete but excluding taxes., note:- the rates are f.o.r. at worksite in jharkhand including royalty, inspection charges and other taxes but excluding gst & c.p., 1. fitting upto 500mm dia, 2. fitting above 500mm dia, di double flanged pipe: providing and supplying isi mark centrifugally cast (spun) ductile iron pressure pipes with double flanged (welded) end of 100 mm and above all diameter for water works confirming to is 8329/2000 in the standard working lengths of 1, 2, 3, 4 & 5 m suitable for classification k-9 with cement mortar lining inside the pipes with outside zinc and bittuminous coating., note:- rates are f.o.r. at worksite in jharkhand incluing royalty, inspection charges and other taxes but excluding gst & contractor profit., pn- 10.0, dia of pipe: 100 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 150 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 200 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 250 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 300 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 350 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 400 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 450 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 500 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 600 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 700 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 800 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 900 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 1000 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., di double flanged pipe: providing and supplying isi mark centrifugally cast (spun) ductile iron pressure pipes with double flanged (welded) end of 100 mm and above all diameter for water works confirming to is 8329/2000 in the standard working lengths of 1, 2, 3, 4 & 5 m suitable for classification k-9 with cement mortar lining inside the pipes with outside zinc and bittuminous coating., note:- rates are f.o.r. at worksite in jharkhand incluing royalty, inspection charges and other taxes but excluding gst & contractor profit., pn- 16.0, dia of pipe: 100 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr., 5 mtr., dia of pipe: 150 mm, length of pipe:, 1 mtr., 2 mtr., 3 mtr., 4 mtr.

CTN :45592297

01 Jul, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan

corporations/Associations/Others

CTN :45633269

30 Jun, 2026 43.90 Lacs

Modasa - Gujarat

Tender For supplying of pipe line materials for annual year 2026-27 for modasa nagarpalika modasa (arvalli) = manufacture, supply & delivery of electric resistance welded (up to 400mm)/submerged arc welded(above 400mm) m.s.pipe having beveled ends plate or coil conforming to is- 3589-2001 or its latest revision/ ammendment for following thickness outside diameter at gwssb store or site anywhere in gujarat state including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all complete. (rate for ms pipe based on the ex. works price of hr coil as rs.58500 per mt - withouth gst (above 3.15 mm to 10 mm) & rs. 59000.00 per mt without gst , providing and supplying d.i. k-9 grade pipes for following nominal bore diameter with internal cement mortar lining including all taxes, insurance, transportation,freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all .complete(is 8329-2000) rate for di pipe based on wholesale price index of pig iron as 149.2 for the month of jan-2022 for sewerage project cement mortor lining shall be with sulphate resistance cement , providing and supplying in standard length , isi mark rigid unplasticised pvc pipes suitable for portable water with ring fit joint including cost of rings, asper is specification no. 4985/1988 including all local and central taxes , transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores and including cost of jointing meterial etc. complete , providing and supplying in standard length , isi mark high density polythlene h.d.p.e. pipes suitable for potable water as per is specification no. 4984/1995 incliding all local and central taxes , transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc . comp. (1) rate for hdpe (pe-100) pipe based on the rate of hdpe resin as rs. 121185/mt (price without gst)10.0 kg/cm2 , providing and supplying isi mark g.i. pipe with coupling of following class and dia. including all texes, insurance,transportation, freight charges, octroi, inspection charges, loading, unloading conveyance to departmental stores, stacking etc. all .complete (is -1239)( not for well / tube well column pipe) , ms specials 7.1.a. ms specials plain and socket ends up to 300 mm dia, above 300mm dia. 7.1.b. ms specials flanged ends up to 300 mm dia, above 300mm dia. , d.i. specials manufacture, supply and delivary of ductile iron flanged scoket ,spigot bends, tees, reducers or any other specials as per bs- en 545/1995 class-a series k12 suitable for use with d.i. pipes manufactured as per is. 8329/1994 delivery of specials is to be made to gwssb store or site of works any where in gujrat including all taxes, loading, unloading, carting, stacking, insurance, inspection charges , octroi etc complete. with external bitumen and zinc coating and internal cement mortar lining , pvc fittings providing and supplying at store or site of work including all taxes, loading, unloading, carting, stacking, insurance, inspection charges , octroi etc complete. , c.i.d. joints manufacture , supply and delivary of cast iron detachable joints short and long) complete with joint flanges duly drilled synthetic rubber sealing rings manufactured from styene butadine (sbr) and other required accessories such as nut, bolt etc. conforming to is specification 8794-1988 or its lastest revision if any suitable for use with a.c. pressure pipes, pvc pipes and d.i. pipes delivary of joints including its accessories including loading, unloading, carting, stacking, insurance. all taxes, octroi etc. complete. , slice valves providing and supplying isi mark ci d/f sluice valves as per is :14846 ( latest edition) of following class and diameter including all , taxes, insurance, transportation, freight charges, octroi, inspection char

Central Government/Public Sector

CTN :44924035

15 Jun, 2026 15.72 Lacs

Bardhaman - West Bengal

Tender For bid to ras supply of pipe, material: ductile iron as per is: 8329/2000 nominal diameter, dn: 450mm

corporations/Associations/Others

CTN :45417185

18 Jun, 2026 8.09 Lacs

Rajahmundry - Andhra Pradesh

Tender For supply of store materials for maintenance of water supply (o attend leaks) in lalachervu in rmc.- 110m dia pvc couplings , 110mm dia pvc bends , 110mm dia pvc cid joint , 110mm dia pvc couplings , 110mm dia pvc dummy , 110mm dia pvc elbows , 110mm dia pvc reducers , 110mm dia pvc tile pieces , 110mm dia upvc pipe , 118ml cpvc solvent solution , 3/4" gi bends , 3/4" gi couplings , 3/4" gi elbows , 3/4" gi union , 3/4" upvc ball valve , 3/4" upvc couplings , 3/4" upvc elbows , 3/4" upvc fta , 3/4" upvc mta , 3/4" upvc pipe , 3/4" x 110mm pvc saddle , 3/4" x 12" gi nipples , 3/4" x 6" gi nipples , 50mm dia pvc ball valve , 50mm dia pvc bends , 90mm dia pvc reducers , manufacture, supply and delivery of hdpe pipes confirming to is: 4984-1995 including transportation to any where in a.p., excluding excise duty, sale tax and specials etc. complete (supply upto 90mm dia in coil & above 90mm dia straight length in 6 m.) as per ss for 110mm dia, pn6, pe-100 grade hdpe pipes in 6 mtrs length , manufacture, supply and delivery of hdpe pipes confirming to is: 4984-1995 including transportation to any where in a.p., excluding excise duty, sale tax and specials etc. complete (supply upto 90mm dia in coil & above 90mm dia straight length in 6 m.) as per ss for 90mm dia, pn6, pe-100 grade hdpe pipes in 6 mtrs length , manufacture, supply, delivery and fixing of required m.s. fabricated pipe and specials (bends, tees and reducers etc.) using required size m.s. sheet and providing redoxide paint and anticorrosion paint two coats including cost of all materials conveyance to work spot and all labour charges etc. complete as per the instructions of the departmental authorities. , shellac bottles , supply and delivery of "resilient seated soft sealing" gate valves (sluice valves) with body and bonnet of ductile iron ggg-40/sg-400/15 or ggg-50/sg-500/7 or equivalent as per is1865, is:3896-2 and wedge fully rubber lined with food grade quality grade w270 grade epdm, replaceable spindle nut without gland packing with 3-o ring protection system on the shaft and seals of nbr. the valves should be vacuum tight and 100% leak proof with face to face dimensions as bs:5163 type a/is:14846. all the valves should be with fusion bonded electrostatic powder coating both inside and outside (min 250 microns)- ral 5005 with pocket less straight through body passage conforming to design standards of din-3202f4/bs:5163 type a flange drilling as per is - 1538 excluding all taxes, duties and transportation. for 100mm dia pn 1.6 (mpa) , supply and delivery of "resilient seated soft sealing" gate valves (sluice valves) with body and bonnet of ductile iron ggg-40/sg-400/15 or ggg-50/sg-500/7 or equivalent as per is1865, is:3896-2 and wedge fully rubber lined with food grade quality grade w270 grade epdm, replaceable spindle nut without gland packing with 3-o ring protection system on the shaft and seals of nbr. the valves should be vacuum tight and 100% leak proof with face to face dimensions as bs:5163 type a/is:14846. all the valves should be with fusion bonded electrostatic powder coating both inside and outside (min 250 microns)- ral 5005 with pocket less straight through body passage conforming to design standards of din-3202f4/bs:5163 type a flange drilling as per is - 1538 excluding all taxes, duties and transportation. for 150mm dia pn 1.6 (mpa) , supply and delivery of 100mm dia x 15mm thick ms flanges including cost of bolts, nuts, rubber packing etc. complete and flange thickness confirming to is: 7322 - 1985 and flange dimensions confirming to is: 1538-1993 excluding cost of m.s. specials including cost of materials and conveyance to work spot and all labour charges etc. complete as per s.s. , supply and delivery of 110mm dia hdpe long neck collars confirming to is 4984-1995 of approved standard make including cost and conveyance to work spot and all labour charges etc. complete as per ss. , supply and delivery of 150mm dia x 15mm thick ms flanges inc

State Government

CTN :45015798

05 Jun, 2026 32.85 Lacs

Kanker - Chhattisgarh

Tender For corrigendum : providing, laying and jointing socket & spigot centrifugally cast (spun) ductile iron pressure pipes with inside cement mortar lining (200 mm dia di k-9 pipe) conforming to is8329/2000 with suitable rubber gasket (push on) joints as per is:5382/85 including testing of joint (laying conforming to is 12288 : (200 mm dia di k-9 pipes.) & for balance work of old work orderwith latest amendment including valves & specials as per specification with materials including all allied civil works & trial run for three month under charama augmentation water supply scheme.

CTN :45426988

09 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For providing various water supply schemes under jsv section palampur under jal shakti sub-division palampur in in tehsil palampur, distt. kangra (h.p) (sh:- unloading and stacking of cement, bleaching powder, galvinised iron pipes and cast iron pipe, ductile iron pipes of various dia in divisional store differpatt, palampur.

Aluminium Pipe Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

State Government